Enerdrive MPPT Solar Charge Controller 40A 12/24V
Enerdrive MPPT Solar Charge Controller 40A 12/24V. A solar charge controller to regulate the power flow between the solar panel and battery, extending the life of the battery with optimized charging. MPPT control algorithm can maximise power point loss rate and loss time, to quickly track the maximum power point (MPP) of the PV array, to obtain maximum energy from the solar array under any conditions. Providing protection against overcharge/discharge and electrical surges. Enjoy moments that matter with a peace of mind, with Enerdrive | Dometic to keep you connected and powered, no matter where your journey takes you.
Features:
- CE certification (LVD EN/IEC62109,EMC EN61000-6-1/3).
- LCD display.
- Advanced MPPT technology & ultra-fast tracking speed guarantee’s tracking efficiency up to 99.5%.
- Maximum DC/DC transfer efficiency is as high as 98.6%.
- Advanced MPPT control algorithm to minimize the MPP lost rate and lost time.
- Accurate recognition and tracking of multi-peaks maximum power point.
- Wide MPP operating voltage range.
- Support lead-acid and lithium batteries.
- Real-time energy statistics function.
- Power reduction automatically over temperature value.
- Multiple load work modes.
- Comprehensive electronic protection.
- IP33 Ingress protection.
- Comms port included for future applications.
Specifications:
- Nominal Voltage Range: 12/24VDC Auto Select ¹.
- Battery Voltage Range: 8 ~ 32V.
- Maximum Battery Current Output: 40A.
- Maximum Load Current Output: 40A.
- Maximum PV Open Circuit Voltage: 100V ², 92V ³.
- MPPT Voltage Range: (Battery Voltage + 2V) - 72V.
- Maximum PV Array Power Recommended: 600W/12V,
1200W/24V. - Maximum PV Array Power Allowed (Overdrive): 720W/12V,
1440W/24V. - Efficiency (Maximum): 98.60%.
- Self Consumption: ≤30mA (12V), ≤16mA (24V).
- Temperature Compensate Coefficient 4: -3mV/°C/12V (Default).
- Grounding: Common Negative.
- RS485 Interface: 5VDC/200mA (RJ45).
- LCD Backlight Timeout: Default: 60S, Range,: 0~999S (OS: the backlight is ON all the time).
- Environmental Parameters:
- Environmental Temperature 5: -25°C ~ +50°C.
- Storage Temperature Range: -20°C ~ +70°C.
- Relative Humidity: ≤95%, N.C.
- IP Rating: IP33.
- Mechanical Parameters:
- Dimensions (mm): 255 (L)x 185 (W)x 67.8 (H).
- Mounting Hole Dimensions (mm): 200 x 176.
- Mounting Hole Size: 5mm.
- Maximum Cable Size (Connector Input/Output): 6AWG (13.2mm²).
- Recommended Cable Size (Connector Input/Output): 6AWG (13.2mm²).
Note:
- When lithium battery is used, the system voltage can’t be identified automatically.
- At minimum operating environment temperature.
- At 25°C environment temperature.
- When lithium battery is used, the temperature compensate coefficient must be 0, and can’t be changed.
- The controller can supply full load working in the environment temperature. When the internal temperature reaches 81°C, the reduced charging power mode is turned on.
Enerdrive MPPT Solar Charge Controller 40A 12/24V
Enerdrive MPPT Solar Charge Controller 40A 12/24V. A solar charge controller to regulate the power flow between the solar panel and battery, extending the life of the battery with optimized charging. MPPT control algorithm can maximise power point loss rate and loss time, to quickly track the maximum power point (MPP) of the PV array, to obtain maximum energy from the solar array under any conditions. Providing protection against overcharge/discharge and electrical surges. Enjoy moments that matter with a peace of mind, with Enerdrive | Dometic to keep you connected and powered, no matter where your journey takes you.
Features:
- CE certification (LVD EN/IEC62109,EMC EN61000-6-1/3).
- LCD display.
- Advanced MPPT technology & ultra-fast tracking speed guarantee’s tracking efficiency up to 99.5%.
- Maximum DC/DC transfer efficiency is as high as 98.6%.
- Advanced MPPT control algorithm to minimize the MPP lost rate and lost time.
- Accurate recognition and tracking of multi-peaks maximum power point.
- Wide MPP operating voltage range.
- Support lead-acid and lithium batteries.
- Real-time energy statistics function.
- Power reduction automatically over temperature value.
- Multiple load work modes.
- Comprehensive electronic protection.
- IP33 Ingress protection.
- Comms port included for future applications.
Specifications:
- Nominal Voltage Range: 12/24VDC Auto Select ¹.
- Battery Voltage Range: 8 ~ 32V.
- Maximum Battery Current Output: 40A.
- Maximum Load Current Output: 40A.
- Maximum PV Open Circuit Voltage: 100V ², 92V ³.
- MPPT Voltage Range: (Battery Voltage + 2V) - 72V.
- Maximum PV Array Power Recommended: 600W/12V,
1200W/24V. - Maximum PV Array Power Allowed (Overdrive): 720W/12V,
1440W/24V. - Efficiency (Maximum): 98.60%.
- Self Consumption: ≤30mA (12V), ≤16mA (24V).
- Temperature Compensate Coefficient 4: -3mV/°C/12V (Default).
- Grounding: Common Negative.
- RS485 Interface: 5VDC/200mA (RJ45).
- LCD Backlight Timeout: Default: 60S, Range,: 0~999S (OS: the backlight is ON all the time).
- Environmental Parameters:
- Environmental Temperature 5: -25°C ~ +50°C.
- Storage Temperature Range: -20°C ~ +70°C.
- Relative Humidity: ≤95%, N.C.
- IP Rating: IP33.
- Mechanical Parameters:
- Dimensions (mm): 255 (L)x 185 (W)x 67.8 (H).
- Mounting Hole Dimensions (mm): 200 x 176.
- Mounting Hole Size: 5mm.
- Maximum Cable Size (Connector Input/Output): 6AWG (13.2mm²).
- Recommended Cable Size (Connector Input/Output): 6AWG (13.2mm²).
Note:
- When lithium battery is used, the system voltage can’t be identified automatically.
- At minimum operating environment temperature.
- At 25°C environment temperature.
- When lithium battery is used, the temperature compensate coefficient must be 0, and can’t be changed.
- The controller can supply full load working in the environment temperature. When the internal temperature reaches 81°C, the reduced charging power mode is turned on.