ePOWER B-TEC LiFeP04 12v 100Ah Lithium Battery With Built-in Bluetooth Monitoring
The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Lithium vs. AGM Capacity: 100Ah Lithium = 160Ah AGM
Smart Phone Monitoring System
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the app to your smartphone or tablet device, you can monitor the following information:
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Specifications
Normal Specification |
EPL-100BT-12V |
EPL-125BT-12V |
EPL-200BT-12V |
Note: Specifications subject to change without notice. | |||
Nominal Voltage |
12.8V |
||
Nominal Capacity |
100Ah |
125Ah |
200Ah |
Cycle Life (DOD – 80% under controlled conditions) |
≥ 2000 Cycles |
||
Standard Charge Specification (Lithium profile charger required) | |||
Battery Charge Temperature |
0 ? 45°C |
||
Normal Charge Voltage CV/CC* |
14.40 ? 14.60V |
ePOWER B-TEC LiFeP04 12v 100Ah Lithium Battery With Built-in Bluetooth Monitoring
The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Lithium vs. AGM Capacity: 100Ah Lithium = 160Ah AGM
Smart Phone Monitoring System
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the app to your smartphone or tablet device, you can monitor the following information:
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Specifications
Normal Specification |
EPL-100BT-12V |
EPL-125BT-12V |
EPL-200BT-12V |
Note: Specifications subject to change without notice. | |||
Nominal Voltage |
12.8V |
||
Nominal Capacity |
100Ah |
125Ah |
200Ah |
Cycle Life (DOD – 80% under controlled conditions) |
≥ 2000 Cycles |
||
Standard Charge Specification (Lithium profile charger required) | |||
Battery Charge Temperature |
0 ? 45°C |
||
Normal Charge Voltage CV/CC* |
14.40 ? 14.60V |