Enerdrive 3200W/120A 12V ePRO Combi Inverter Charger with Remote
Enerdrive 3200W/120A 12V ePRO Combi Inverter Charger with Remote. In cases of grid/generator failure or disconnection, the ePRO Combi Inverter Charger acts as an uninterruptible AC power supply by terminating charges to the battery, releases the AC transfer switch and activates the inverter. Taking over the supply to the connected loads. In cases the grid/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter. The connected loads are now supplied again by the grid/generator without any interruption. Typically used in recreational vehicles, solar power systems, industrial systems, commercial work vehicles and marine systems. Enjoy moments that matter with a peace of mind, with Enerdrive | Dometic to keep you connected and powered, no matter where your journey takes you.
Key Features:
- Universal Remote Control: The Universal Remote Control (URC) can be used to remotely readout all available parameters from your ePRO inverter/charger Combi, like charging current, output voltage, charge stage, etc. This kit comes with mounting screws and a 3m interface cable (standard cat5 patch cable). The URC automatically recognizes to which type of equipment it is connected.
- Intelligent 4-stage charge programs: user programmable to fit any battery type.
- Fully programmable inverter, transfer switch and battery charger parameters.
Specifications:
- Output power (VA): 3000VA.
- Output power (1) Pnom: 2600W.
- P10minutes: 3200W.
- Psurge: 5000W.
- Output voltage / frequency: 230 Vac ± 2% / 50 Hz ± 0.05%.
- Output waveform: 230 Vac ± 2% / 50 Hz ± 0.05%.
- Input voltage (± 3% tolerance): Nominal: 12V.
- Range: 10.5 (2) – 16 Vdc.
- Maximum efficiency: 92%.
- No load power consumption (2) [ASB]: <20 W [3.5 W].
- Charger stage:
- AC input voltage: 185 – 270 Vac / 45 – 65 Hz / PF > 0.95.
- Maximum continuous charging current (4): 120A.
- Standard charge voltage (bulk / float @ 25°C): 14.3V / 13.3V (programmable).
- Charge algorithm: IUoUoP, intelligent 4-stage, temperature compensated (programmable).
- AC Transfer Switch:
- Maximum continuous current: 30 Ams.
- Transfer time (typical): 0 ms (inverter to mains) / <5 ms (mains to inverter).
- General:
- ePROLink enabled: Yes.
- Protections: high/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage.
- DC connections: M10 bolt terminals.
- AC connections: Screw terminals.
- Enclosure body size (mm): 370 x 431 x 132.
- Total weight (kg): 18.5.
- Protection class / operating temp. / storage temp.: IP21 / -20°C.. +50°C / -40°C.. +80°C (humidity max. 95% non-condensing).
- Standards: Complies with IEC 60335-2-29 including Australian deviations.
Note: Specifications subject to change without notice.
- Measured with resistive load at 25°C ambient. Power ratings are subject to a tolerance of 10% and are decreasing as temperature rises with a rate of approx. 1.2%/°C starting from 25°C. Pnom is a typical value, measured using battery capacities of 200 Ah @ 12V and 100 Ah @ 24V.
- Undervoltage limit is dynamic. This limit decreases with increasing load to compensate the voltage drop across cables and connections.
- Measured at nominal input voltage and 25°C.
- At high ambient temperatures, maximum output current shall be reduced automatically.
Enerdrive 3200W/120A 12V ePRO Combi Inverter Charger with Remote
Enerdrive 3200W/120A 12V ePRO Combi Inverter Charger with Remote. In cases of grid/generator failure or disconnection, the ePRO Combi Inverter Charger acts as an uninterruptible AC power supply by terminating charges to the battery, releases the AC transfer switch and activates the inverter. Taking over the supply to the connected loads. In cases the grid/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter. The connected loads are now supplied again by the grid/generator without any interruption. Typically used in recreational vehicles, solar power systems, industrial systems, commercial work vehicles and marine systems. Enjoy moments that matter with a peace of mind, with Enerdrive | Dometic to keep you connected and powered, no matter where your journey takes you.
Key Features:
- Universal Remote Control: The Universal Remote Control (URC) can be used to remotely readout all available parameters from your ePRO inverter/charger Combi, like charging current, output voltage, charge stage, etc. This kit comes with mounting screws and a 3m interface cable (standard cat5 patch cable). The URC automatically recognizes to which type of equipment it is connected.
- Intelligent 4-stage charge programs: user programmable to fit any battery type.
- Fully programmable inverter, transfer switch and battery charger parameters.
Specifications:
- Output power (VA): 3000VA.
- Output power (1) Pnom: 2600W.
- P10minutes: 3200W.
- Psurge: 5000W.
- Output voltage / frequency: 230 Vac ± 2% / 50 Hz ± 0.05%.
- Output waveform: 230 Vac ± 2% / 50 Hz ± 0.05%.
- Input voltage (± 3% tolerance): Nominal: 12V.
- Range: 10.5 (2) – 16 Vdc.
- Maximum efficiency: 92%.
- No load power consumption (2) [ASB]: <20 W [3.5 W].
- Charger stage:
- AC input voltage: 185 – 270 Vac / 45 – 65 Hz / PF > 0.95.
- Maximum continuous charging current (4): 120A.
- Standard charge voltage (bulk / float @ 25°C): 14.3V / 13.3V (programmable).
- Charge algorithm: IUoUoP, intelligent 4-stage, temperature compensated (programmable).
- AC Transfer Switch:
- Maximum continuous current: 30 Ams.
- Transfer time (typical): 0 ms (inverter to mains) / <5 ms (mains to inverter).
- General:
- ePROLink enabled: Yes.
- Protections: high/low battery voltage, high temperature, overload, short circuit, high ripple voltage and low AC input voltage.
- DC connections: M10 bolt terminals.
- AC connections: Screw terminals.
- Enclosure body size (mm): 370 x 431 x 132.
- Total weight (kg): 18.5.
- Protection class / operating temp. / storage temp.: IP21 / -20°C.. +50°C / -40°C.. +80°C (humidity max. 95% non-condensing).
- Standards: Complies with IEC 60335-2-29 including Australian deviations.
Note: Specifications subject to change without notice.
- Measured with resistive load at 25°C ambient. Power ratings are subject to a tolerance of 10% and are decreasing as temperature rises with a rate of approx. 1.2%/°C starting from 25°C. Pnom is a typical value, measured using battery capacities of 200 Ah @ 12V and 100 Ah @ 24V.
- Undervoltage limit is dynamic. This limit decreases with increasing load to compensate the voltage drop across cables and connections.
- Measured at nominal input voltage and 25°C.
- At high ambient temperatures, maximum output current shall be reduced automatically.