Blackhawk UCA4070A Upper Control Arms for VW Amarok up to 2021
Improve alignment and steering response on your lifted Volkswagen Amarok with Blackhawk UCA4070A front upper control arms. Designed for models up to 2021 with 30-70mm suspension lifts, these arms provide fixed caster correction and revised camber geometry to help compensate for changes caused by lifting the vehicle.
Features
- Alignment correction: Built-in caster correction allows final settings to be fine-tuned using the factory adjusters.
- Improved clearance: Revised arm geometry helps create space around larger tyres, wheels, coils and chassis components.
- Fixed ball joint mounts: Secure mounting positions avoid adjustment slippage, while reoriented housings help reduce binding during suspension droop.
- Heavy-duty ball joints: Greaseable Roadsafe joints feature heat-treated studs and seats for wear resistance.
- Ride comfort: OE-specification rubber bushes help isolate noise, vibration and harshness.
- Protective finish: Black e-coating protects the arms, while anodised alloy caps help shield the ball joints from water, dust and mud.
- Tested design: Blackhawk's development includes computer load analysis reviewed by VASS engineers, supported by manufacturing quality checks.
Specifications
- Brand: Blackhawk 4x4 by Roadsafe
- Part number: UCA4070A
- Vehicle: Volkswagen Amarok models up to 2021
- Position: Front upper, left and right
- Required suspension lift: 30-70mm
- Replacement ball joint: BJ4070HD
- Replacement bush: S0532R
- Replacement ball joint cap: UCABHCAP1
Inclusions
- One left and one right upper control arm
- Pre-fitted OE-specification rubber bushes
- Pre-fitted heavy-duty greaseable ball joints with protective caps
Original chassis mounting hardware is retained for reuse during fitting.
Frequently Asked Questions
Will these arms suit a standard-height Amarok?
No. Roadsafe specifies UCA4070A for vehicles with a 30-70mm suspension lift. Blackhawk lists this kit for Amarok models up to 2021.
Are these adjustable upper control arms?
No. The arms have fixed correction and fixed-position ball joints. The vehicle's factory adjustment points provide final alignment adjustment.
What fitting and maintenance are required?
Have a qualified 4WD suspension mechanic install the arms and arrange a wheel alignment. Grease the ball joints at installation and regular service intervals. Check suspension and ABS line clearance throughout travel, and recheck fastener tensions after 1,000km.
Blackhawk UCA4070A Upper Control Arms for VW Amarok up to 2021
Improve alignment and steering response on your lifted Volkswagen Amarok with Blackhawk UCA4070A front upper control arms. Designed for models up to 2021 with 30-70mm suspension lifts, these arms provide fixed caster correction and revised camber geometry to help compensate for changes caused by lifting the vehicle.
Features
- Alignment correction: Built-in caster correction allows final settings to be fine-tuned using the factory adjusters.
- Improved clearance: Revised arm geometry helps create space around larger tyres, wheels, coils and chassis components.
- Fixed ball joint mounts: Secure mounting positions avoid adjustment slippage, while reoriented housings help reduce binding during suspension droop.
- Heavy-duty ball joints: Greaseable Roadsafe joints feature heat-treated studs and seats for wear resistance.
- Ride comfort: OE-specification rubber bushes help isolate noise, vibration and harshness.
- Protective finish: Black e-coating protects the arms, while anodised alloy caps help shield the ball joints from water, dust and mud.
- Tested design: Blackhawk's development includes computer load analysis reviewed by VASS engineers, supported by manufacturing quality checks.
Specifications
- Brand: Blackhawk 4x4 by Roadsafe
- Part number: UCA4070A
- Vehicle: Volkswagen Amarok models up to 2021
- Position: Front upper, left and right
- Required suspension lift: 30-70mm
- Replacement ball joint: BJ4070HD
- Replacement bush: S0532R
- Replacement ball joint cap: UCABHCAP1
Inclusions
- One left and one right upper control arm
- Pre-fitted OE-specification rubber bushes
- Pre-fitted heavy-duty greaseable ball joints with protective caps
Original chassis mounting hardware is retained for reuse during fitting.
Frequently Asked Questions
Will these arms suit a standard-height Amarok?
No. Roadsafe specifies UCA4070A for vehicles with a 30-70mm suspension lift. Blackhawk lists this kit for Amarok models up to 2021.
Are these adjustable upper control arms?
No. The arms have fixed correction and fixed-position ball joints. The vehicle's factory adjustment points provide final alignment adjustment.
What fitting and maintenance are required?
Have a qualified 4WD suspension mechanic install the arms and arrange a wheel alignment. Grease the ball joints at installation and regular service intervals. Check suspension and ABS line clearance throughout travel, and recheck fastener tensions after 1,000km.