Blackhawk UCA3092S Upper Control Arms for Ford Ranger PY & VW Amarok
Improve suspension geometry on your lifted 4WD with Blackhawk UCA3092S upper control arms. Designed for Ford Ranger PY and VW Amarok models with steel front steering knuckles, these replacement arms combine corrected geometry, heavy-duty construction and serviceable components.
Raising suspension can affect wheel alignment, steering response and component clearance. Blackhawk arms provide fixed caster correction while retaining factory adjustment for fine-tuning, helping address the geometry changes associated with a suspension lift.
Features
- Lift-specific geometry: Designed for 30–70mm suspension lifts, with additional caster and corrected camber.
- Heavy-duty tubing: DOM tube with a 6mm wall thickness.
- Serviceable ball joints: High-angle, greaseable units with heat-treated chromoly ball studs and seats.
- Fixed ball joint position: Avoids an adjustable ball joint mount shifting under off-road loads.
- Improved clearance: Revised arm geometry helps reduce interference with suspension components and larger wheel and tyre combinations.
- Rubber bushes: OE-specification bushings help absorb noise, vibration and harshness.
- Protective finish: Corrosion-resistant E-coating with a durable high-gloss industrial powder coat.
Specifications
- Part number: UCA3092S
- Application: Ford Ranger PY / VW Amarok, steel front steering knuckles only
- Suspension lift range: 30–70mm
- Replacement ball joint: BJ3092SHD
- Replacement bush: S0564R
- Replacement ball joint cap: UCABHCAP2
Inclusions
- Blackhawk upper control arms with ball joints and rubber bushes.
Frequently Asked Questions
Will these fit aluminium steering knuckles?
No. Aluminium-knuckle models require Blackhawk UCA3091A. Confirm your vehicle's knuckle material before ordering.
What suspension lift are these designed for?
They suit lifts of 30–70mm, with geometry correction built into the arms.
Are replacement service parts available?
Yes. Replacement ball joints, bushes and ball joint caps are available using the part numbers listed above.
Blackhawk UCA3092S Upper Control Arms for Ford Ranger PY & VW Amarok
Improve suspension geometry on your lifted 4WD with Blackhawk UCA3092S upper control arms. Designed for Ford Ranger PY and VW Amarok models with steel front steering knuckles, these replacement arms combine corrected geometry, heavy-duty construction and serviceable components.
Raising suspension can affect wheel alignment, steering response and component clearance. Blackhawk arms provide fixed caster correction while retaining factory adjustment for fine-tuning, helping address the geometry changes associated with a suspension lift.
Features
- Lift-specific geometry: Designed for 30–70mm suspension lifts, with additional caster and corrected camber.
- Heavy-duty tubing: DOM tube with a 6mm wall thickness.
- Serviceable ball joints: High-angle, greaseable units with heat-treated chromoly ball studs and seats.
- Fixed ball joint position: Avoids an adjustable ball joint mount shifting under off-road loads.
- Improved clearance: Revised arm geometry helps reduce interference with suspension components and larger wheel and tyre combinations.
- Rubber bushes: OE-specification bushings help absorb noise, vibration and harshness.
- Protective finish: Corrosion-resistant E-coating with a durable high-gloss industrial powder coat.
Specifications
- Part number: UCA3092S
- Application: Ford Ranger PY / VW Amarok, steel front steering knuckles only
- Suspension lift range: 30–70mm
- Replacement ball joint: BJ3092SHD
- Replacement bush: S0564R
- Replacement ball joint cap: UCABHCAP2
Inclusions
- Blackhawk upper control arms with ball joints and rubber bushes.
Frequently Asked Questions
Will these fit aluminium steering knuckles?
No. Aluminium-knuckle models require Blackhawk UCA3091A. Confirm your vehicle's knuckle material before ordering.
What suspension lift are these designed for?
They suit lifts of 30–70mm, with geometry correction built into the arms.
Are replacement service parts available?
Yes. Replacement ball joints, bushes and ball joint caps are available using the part numbers listed above.