Blackhawk UCA4729Q Upper Control Arms for Mitsubishi Triton & Pajero Sport
The Blackhawk UCA4729Q upper control arm kit suits Mitsubishi Triton MQ/MR and Pajero Sport applications. A serviceable suspension upgrade, these arms connect the chassis to the wheel assembly while allowing independent wheel movement.
Developed for lifted suspension, the design adds caster and improves clearance around larger aftermarket struts.
Features
- Rearward ball joint positioning provides approximately 3 degrees of additional caster.
- Pressed tube relief increases strut clearance.
- Factory droop stops fit without cutting or modification.
- Driver-side provision accommodates the factory headlight levelling sensor where fitted.
- Fixed-position, greaseable heavy-duty ball joints with heat-treated wear surfaces.
- OE-specification rubber bushes help absorb noise and vibration.
- Protective ball joint caps and a durable black E-coated finish.
Specifications
- Part number: UCA4729Q
- Fitment: Mitsubishi Triton MQ/MR; Pajero Sport 2016 onwards
- Lift range: 30–70mm
- Minimum wheel diameter: 17 inches
- Replacement ball joint: BJ4729HD
- Replacement bush: S0535R
- Replacement ball joint cap: UCABHCAP2
Inclusions
- Blackhawk upper control arms with ball joints and rubber bushes.
Installation Note
A wheel alignment is required immediately after installation. Existing caster settings can cause strut contact following fitment. Check clearances before driving.
Frequently Asked Questions
Will these fit 16-inch wheels?
No. Blackhawk specifies wheels measuring 17 inches or larger.
Do the factory droop stops need trimming?
No. The arms accommodate unmodified OE droop stops.
Are replacement service parts available?
Yes. Roadsafe lists replacement ball joints, bushes and caps under the part numbers above.
Blackhawk UCA4729Q Upper Control Arms for Mitsubishi Triton & Pajero Sport
The Blackhawk UCA4729Q upper control arm kit suits Mitsubishi Triton MQ/MR and Pajero Sport applications. A serviceable suspension upgrade, these arms connect the chassis to the wheel assembly while allowing independent wheel movement.
Developed for lifted suspension, the design adds caster and improves clearance around larger aftermarket struts.
Features
- Rearward ball joint positioning provides approximately 3 degrees of additional caster.
- Pressed tube relief increases strut clearance.
- Factory droop stops fit without cutting or modification.
- Driver-side provision accommodates the factory headlight levelling sensor where fitted.
- Fixed-position, greaseable heavy-duty ball joints with heat-treated wear surfaces.
- OE-specification rubber bushes help absorb noise and vibration.
- Protective ball joint caps and a durable black E-coated finish.
Specifications
- Part number: UCA4729Q
- Fitment: Mitsubishi Triton MQ/MR; Pajero Sport 2016 onwards
- Lift range: 30–70mm
- Minimum wheel diameter: 17 inches
- Replacement ball joint: BJ4729HD
- Replacement bush: S0535R
- Replacement ball joint cap: UCABHCAP2
Inclusions
- Blackhawk upper control arms with ball joints and rubber bushes.
Installation Note
A wheel alignment is required immediately after installation. Existing caster settings can cause strut contact following fitment. Check clearances before driving.
Frequently Asked Questions
Will these fit 16-inch wheels?
No. Blackhawk specifies wheels measuring 17 inches or larger.
Do the factory droop stops need trimming?
No. The arms accommodate unmodified OE droop stops.
Are replacement service parts available?
Yes. Roadsafe lists replacement ball joints, bushes and caps under the part numbers above.