Blackhawk UCA4525T Upper Control Arms for Mitsubishi Triton MV 2024+
Improve suspension geometry on your lifted Mitsubishi Triton MV with Blackhawk UCA4525T upper control arms. Designed to correct caster and camber after a suspension lift, these replacement arms combine heavy-duty construction with serviceable components for touring and off-road use.
Fixed caster correction works with the factory alignment adjusters, allowing your installer to fine-tune the setup for your vehicle's lift.
Features
- Heavy-duty construction: 6mm DOM tubing and a heat-treated chromoly ball stud.
- Corrected geometry: Helps address caster and camber changes associated with raised suspension.
- Improved clearance: Revised arm geometry helps reduce interference with suspension components and larger wheels and tyres.
- Fixed ball joint position: Revised housing orientation helps reduce binding during suspension droop.
- Serviceable ball joints: Greaseable heavy-duty design with replaceable components.
- Ride comfort: OE-specification rubber bushes help absorb noise, vibration and harshness.
- Protective finish: E-coating and powder coating provide corrosion resistance.
Specifications
- Part number: UCA4525T
- Vehicle: Mitsubishi Triton MV, 2024 onwards
- Lift range: 30–70mm, as specified in Roadsafe's product bulletin
- Replacement ball joint: BJ4525HD
- Replacement bush: S0545R
- Replacement ball joint cap: UCABHCAP2
Inclusions
- Blackhawk upper control arms with ball joints and rubber bushes.
Frequently Asked Questions
What suspension lift suits these arms?
The UCA4525T product bulletin specifies 30–70mm. Blackhawk's webpage lists 25–75mm; confirm suitability before ordering for lifts outside 30–70mm.
Are these arms adjustable?
The arms use fixed geometry correction. Fine-tuning is carried out using the vehicle's factory alignment adjustment.
Are replacement service parts available?
Yes. Replacement ball joints, bushes and caps are available using the part numbers listed above.
Blackhawk UCA4525T Upper Control Arms for Mitsubishi Triton MV 2024+
Improve suspension geometry on your lifted Mitsubishi Triton MV with Blackhawk UCA4525T upper control arms. Designed to correct caster and camber after a suspension lift, these replacement arms combine heavy-duty construction with serviceable components for touring and off-road use.
Fixed caster correction works with the factory alignment adjusters, allowing your installer to fine-tune the setup for your vehicle's lift.
Features
- Heavy-duty construction: 6mm DOM tubing and a heat-treated chromoly ball stud.
- Corrected geometry: Helps address caster and camber changes associated with raised suspension.
- Improved clearance: Revised arm geometry helps reduce interference with suspension components and larger wheels and tyres.
- Fixed ball joint position: Revised housing orientation helps reduce binding during suspension droop.
- Serviceable ball joints: Greaseable heavy-duty design with replaceable components.
- Ride comfort: OE-specification rubber bushes help absorb noise, vibration and harshness.
- Protective finish: E-coating and powder coating provide corrosion resistance.
Specifications
- Part number: UCA4525T
- Vehicle: Mitsubishi Triton MV, 2024 onwards
- Lift range: 30–70mm, as specified in Roadsafe's product bulletin
- Replacement ball joint: BJ4525HD
- Replacement bush: S0545R
- Replacement ball joint cap: UCABHCAP2
Inclusions
- Blackhawk upper control arms with ball joints and rubber bushes.
Frequently Asked Questions
What suspension lift suits these arms?
The UCA4525T product bulletin specifies 30–70mm. Blackhawk's webpage lists 25–75mm; confirm suitability before ordering for lifts outside 30–70mm.
Are these arms adjustable?
The arms use fixed geometry correction. Fine-tuning is carried out using the vehicle's factory alignment adjustment.
Are replacement service parts available?
Yes. Replacement ball joints, bushes and caps are available using the part numbers listed above.