Blackhawk UCA4727CV2 Upper Control Arms for Isuzu D-MAX & Holden Colorado
Improve alignment geometry on your lifted 4WD with Blackhawk UCA4727CV2 upper control arms. Designed for 30–70mm suspension lifts, these replacement arms provide additional caster while retaining factory adjustment for fine-tuning.
Features
- Revised V2 design offers more wheel fitment options than the original version.
- Improved clearance around wheels, tyres and suspension components.
- Fixed-position heavy-duty ball joints with greaseable, heat-treated wear surfaces.
- OE-specification rubber bushes help absorb noise, vibration and harshness.
- Durable black E-coated finish.
- Replaceable ball joints and bushes for ongoing servicing.
Vehicle Fitment
- Isuzu D-MAX: 2012–2019.
- Holden Colorado and Colorado 7: 2012–2016.
- Isuzu MU-X: Confirm build-date compatibility before ordering.
Exclusions: Facelift Colorado 2017–2020 requires UCA4670CV2. New-generation D-MAX introduced in 2020 requires UCA4727D.
Specifications
- Part number: UCA4727CV2
- Suspension lift range: 30–70mm
- Replacement ball joint: BJ4727HD
- Replacement bush: S0531R
- Separate ball joint cap: Not applicable
Inclusions
- Left and right Blackhawk upper control arms with ball joints and rubber bushes.
Installation & Maintenance
Installation requires a qualified mechanic experienced in 4WD suspension, followed by a wheel alignment. Check clearance throughout steering and suspension travel. Grease the ball joints during installation and at regular service intervals.
Frequently Asked Questions
Will these arms fit any aftermarket wheels?
No. Wheel diameter, width and offset affect clearance. Have your wheel and tyre combination checked before fitment.
Do I need a wheel alignment?
Yes. Alignment must account for the revised arm geometry and your vehicle's suspension lift.
Can I replace the ball joints and bushes?
Yes. Use the replacement part numbers listed above.
Blackhawk UCA4727CV2 Upper Control Arms for Isuzu D-MAX & Holden Colorado
Improve alignment geometry on your lifted 4WD with Blackhawk UCA4727CV2 upper control arms. Designed for 30–70mm suspension lifts, these replacement arms provide additional caster while retaining factory adjustment for fine-tuning.
Features
- Revised V2 design offers more wheel fitment options than the original version.
- Improved clearance around wheels, tyres and suspension components.
- Fixed-position heavy-duty ball joints with greaseable, heat-treated wear surfaces.
- OE-specification rubber bushes help absorb noise, vibration and harshness.
- Durable black E-coated finish.
- Replaceable ball joints and bushes for ongoing servicing.
Vehicle Fitment
- Isuzu D-MAX: 2012–2019.
- Holden Colorado and Colorado 7: 2012–2016.
- Isuzu MU-X: Confirm build-date compatibility before ordering.
Exclusions: Facelift Colorado 2017–2020 requires UCA4670CV2. New-generation D-MAX introduced in 2020 requires UCA4727D.
Specifications
- Part number: UCA4727CV2
- Suspension lift range: 30–70mm
- Replacement ball joint: BJ4727HD
- Replacement bush: S0531R
- Separate ball joint cap: Not applicable
Inclusions
- Left and right Blackhawk upper control arms with ball joints and rubber bushes.
Installation & Maintenance
Installation requires a qualified mechanic experienced in 4WD suspension, followed by a wheel alignment. Check clearance throughout steering and suspension travel. Grease the ball joints during installation and at regular service intervals.
Frequently Asked Questions
Will these arms fit any aftermarket wheels?
No. Wheel diameter, width and offset affect clearance. Have your wheel and tyre combination checked before fitment.
Do I need a wheel alignment?
Yes. Alignment must account for the revised arm geometry and your vehicle's suspension lift.
Can I replace the ball joints and bushes?
Yes. Use the replacement part numbers listed above.