DEBUG HEADER : This is a cached page ! Ram Mounts | Piranha Offroad 4WD Products

Ram Mounts

RAM Mounts manufactures rugged and versatile mounting systems, protective cases and docking solutions for phones, tablets, cameras, laptops and other mobile devices that can be attached nearly anywhere.

 

 

RAM-B-108BU

$32.00
Incl. GST

RAM-B-108BU

RAM V-Shape Base with 1" Ball for Rails and Yokes

The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. 


Clamp Dimensions:
1" to 2.1"

RAM-B-189-BU

$46.00
Incl. GST

RAM-B-189BU

RAM Double Suction Cup Base with Universal AMPs Hole Pattern

The RAM-B-189BU consists of a double 3.3" twist lock suction cup base. Included is a hole pattern that will allow attachment to all RAM bases that contain the universal AMPs hole pattern.

RAM-B-224-1U

$30.00
Incl. GST

RAM-B-224-1U

RAM 3.3" Diameter Suction Cup Base with B Size 1" Ball

The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the (RAM-B-238U), diamond base with B size 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.

RAP-B-224-2U

$22.00
Incl. GST

RAP-B-224-2U

RAM 2.75" Diameter Suction Cup Base with 1" Ball

The RAP-B-224-2U consists of a 2.75" twist lock suction cup base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth, non-porous surface. For best results mount the suction cup on glass or non-porous plastic surface.

RAM-B-407-PUMPU

$127.00
Incl. GST

RAM-B-407-PUMPU

RAM Seat Tough-Wedge Accessory with 1" Ball Base and Expansion Pouch

The Tough-Wedge™ is a mount that fits in the gap between the vehicle seat and center console or potentially a center seat. This allows for easy access and operation of a mobile device. The Tough-Wedge™ can also be used for back-seat applications by inserted into the pockets located on the back of the front seats. For capturing video on the go, place the Tough-Wedge™ in your backpack with a RAM camera mount. The included diamond adapter contains the industry standard AMPS hole pattern that allows attachment to a variety of RAM mounts. Hardware included to attach the Tough-Wedge™ to the mount.

The 1" diamond ball base is compatible with all RAM-B size single and double socket arms.

Included in this kit is an innovative Expansion Pouch accessory for the RAM Tough-Wedge™. This optional accessory is designed to add stability to your wedge mount for vehicle with a larger gap between seats. The Expansion Pouch fits inside the Tough-Wedge™ sleeve and is then inflated with the hand pump to the desired level, ensuring your device stays firmly in place.

Tough-Wedge™ Dimensions:
Length: 13.25"
Height: 8.25"
Depth: 1"
Inside Wedge Depth: 0.375" - 0.875"

RAP-B-400U

$56.00
Incl. GST

RAP-B400U

RAM Small Tough-Claw with B Size 1" Diameter Rubber Ball

The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw will soon become another essential RAM® component in your collection of mounting options.

Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"

Clamping Range (Flat Surfaces):
0" to 1.14"

Physical Dimensions:
Height: 4.25"
Width: 1.18"

RAM-B-316-1-202U

$62.00
Incl. GST

RAM-B-316-1-202U

RAM POD 18" No-Drill Vehicle Mount with B Size 1" Ball on Round Plate with AMPs Hole Pattern

The RAM-B-316-1-202U consists of the RAM POD I universal No-Drill vehicle base, 18” rigid aluminum rod, single B Size 1" ball socket arm and round base plate. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The 2.5" diameter round base adapter contains the universal AMPS hole pattern.

FITMENT
Make sure your vehicle has an appropriate bolt to mount the base securely.

RAM-316-HDR-202U

$275.00
Incl. GST

RAM-316-HDR-202U

RAM (Reverse Configuration) Universal No-Drill™ RAM POD HD™ Vehicle Mount with Double Socket Arm & 2.5" Round Base AMPs Hole Pattern

Blending the best of versatility, strength and installation ease; the RAM POD HD is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM ToughPod HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM ToughPod HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet.


To check compatibilitiy with your vehicle, review the dimensions of the RAM POD HD™ Foot in this reference guide:
RAM POD HD Compatibility Guide

RAM-B-202U

$12.00
Incl. GST

RAM-B-202U

RAM 2.5" Round Plate with the AMPs Hole Pattern with B Size 1" Ball

The RAM-B-202U consists of a B Size 1" diameter rubber ball connected to a flat 2.5" diameter plate. This mount has pre-drilled holes, including the universal AMPs hole pattern.

RAM-B-201U-A

$23.00
Incl. GST

RAM-B-201U-A

RAM Short Double Socket Arm for B Size 1" Balls

The RAM-B-201U-A, Short length double socket arm, has a socket at both ends that accommodates B Size 1" balls. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.


Dimensions:
Overall Length: 2.38"
Socket-To-Socket Length: 1.75"

RAM-B-201U

$23.00
Incl. GST

RAM-B-201U

RAM Double Socket Arm for B Size 1" Balls

The RAM-B-201U, Medium length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm, keeps the socket open, allowing you to incert the ball in to the socket connection. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.

Dimensions:
Overall Length: 3.69"
Socket-To-Socket Length: 3"

RAM-B-201U-C

$34.00
Incl. GST

RAM-B-201U-C

RAM Long Length Double Socket Arm for B Size 1" Balls

The RAM-B-201U-C, Long length double socket arm, has a socket at both ends that accommodates B Size 1" balls. A single spring inside the arm, keeps the socket open, allowing you to incert the ball in to the socket connection. RAM's socket technology allows for almost infinite adjustment to achieve the perfect viewing angle.

Dimensions:
Overall Length: 6"
Socket-To-Socket Length: 5.25"

RAM-B-230U

$27.00
Incl. GST

RAM-B-230U

RAM 1" Double Ball Adapter

The RAM-B-230U, double ball joiner, consists of a 1" rubber ball on both ends that allow the connection of two 1" socket arms. When measured from ball center to ball center the arm length is 1.75". This mount is ideal if your mount arm is just too short.

RAP-B-202U-GOP1

$18.00
Incl. GST

RAP-B-202U-GOP1

RAM Action Camera Universal Ball Adapter

GoPro® cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro® line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro® make it possible to truly “Be a HERO”.

The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.

RAP-B-166-2-UN7U

$75.00
Incl. GST

RAP-B-166-2-UN7U

RAM Composite Twist-Lock Suction Cup Mount with Universal X-Grip® Cell Phone Cradle

OPTIONAL TETHER INCLUDED
The RAP-B-166-2-UN7U consists of a 2.75" twist lock suction cup base, double socket system and universal spring loaded X-Grip® cradle for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved.

The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
 
ram-b-166-un8u
 
un7 aniamation

RAM-B-166-UN8U

$112.00
Incl. GST

RAM-B-166-UN8U

RAM Twist-Lock Suction Cup Mount with Universal X-Grip® Cradle for 7"-8" Tablets

The RAM-B-166-UN8U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for 7"-8" tablets. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the mount to your optimum viewing position. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet.

The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions
Minimum Width = 2.5" (Minimum Height = 7")
Maximum Width = 5.75" (Minimum Height = 4")
Depth = 0.875"

un8 aniamation
 
 
 
 

RAM-HOL-UN10BU

$52.00
Incl. GST

RAM-HOL-UN10BU

RAM Universal X-Grip® Large Phone/Phablet Cradle

Part# RAM-HOL-UN10BU

OPTIONAL TETHER INCLUDED
The RAM-HOL-UN10BU has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the X-Grip® IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle.

The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Cradle Dimensions
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"

 

un10 aniamation

RAM--HOL-TAB12U

$45.00
Incl. GST

RAM-HOL-TAB12U

RAM Tab-Tite cradle for iPad Mini 1,2,3,4 With or Without a Light Duty Case

The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini 1,2,3,4 WITH Light Duty case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks and USB / Lightning plug.

Included is the necessary hardware to attach to a RAM mounting plate.

For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.


Cradle Dimensions:
Height: 7.125" to 9.5"
Width: 5.06" to 5.68"
Depth: 0.13" to 1"

Note: Product consists of holder only. Case not included.

RAM-HOL-TAB-SMU

$57.00
Incl. GST

RAM-HOL-TAB-SMU

RAM Tab-Tite Cradle for 7" Screen Tablets

Now that you’ve got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

 

RAM-HOL-TAB3U

$47.00
Incl. GST

RAM-HOL-TAB3U

RAM Tab-Tite Cradle for the Apple iPad 1-4 WITH OR WITHOUT LIGHT DUTY CASE

The RAM-HOL-TAB3U consists of a spring loaded back plate and custom support cups. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB3U is just what you need to get the most out of your tablet. The included backplate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the backplate for support of your new tablet.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Cradle Dimensions:
Height: 8.5" to 11.125"
Width: 6.38" to 7.75"
Depth: 0.13" to 0.56"

RAM-HOL-TAB20U

$50.00
Incl. GST

RAM-HOL-TAB20U

RAM Tab-Tite Cradle for the Apple iPad Air 1-2 & 9.7" Tablets WITH CASE, SKIN OR SLEEVE

Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Cradle Dimensions:
Height: 9.5" to 12.125"
Width: 6.55" to 7.43"
Depth: 0.3" to 0.875"

Note: Product consists of holder only. Case not included.